Installing I/O Cards; About I/O Cards - Yamaha AW4416 Operation Manual

Installing I/O cards

About I/O cards

I/O cards compatible with the Yamaha mini-YGDAI format can be installed in the
OPTION I/O slots 1/2 located on the rear panel of the AW4416 in order to add
input/output ports. For example by installing an ADAT format compatible I/O
card into an OPTION I/O slot, you can transmit/receive eight channels of digital
audio to/from an ADAT format digital recorder.
At present, the following types of I/O cards can be used.
MY8-AT
This card transmits and receives eight channels of Alesis ADAT format digital sig-
nals.
MY8-TD
This card transmits and receives eight channels of TASCAM format digital signals.
MY8-AE
This card transmits and receives eight channels of AES/EBU format digital signals.
MY8-AD
This is an A/D card with eight channels of analog input jacks (balanced TRS
phone jacks).
MY4-AD
This is an A/D card with four channels of analog input jacks (balanced XLR jacks).
MY4-DA
This is a D/A card with four channels of analog output jacks (balanced XLR
jacks).
For up-to-date information on available MY cards, contact your local Yamaha dis-
tributor or check the following website.
<http://www.aw4416.com/>
Some types of MY card sold by other manufacturers may be usable only in SLOT
1 or 2.
Before you begin
13
— Operation Guide