Flexible Night Ringing Assignment - Panasonic EASA-PHONE KX-T30810 Installation Manual

[09] [NEXT] [Ai31 [C.. SE] [MEMORY] [END]
[& [NEXT] [NEXTJ [C.. .E] [MEMORY] [END]
L......
until the desired extension number appears
Through programming, you can select which
extensions will ring during the night time on
incoming calls from the Central Ofice.
1. Dial (09).
"NIGHT: IN CO" will be displayed.
2.
Press the NEXT
button.
"ENTER EXT NO" will 'be displayed.
3. Press the NEXT button.
"11: CO 1, 2, 3" will be displayed and "1, 2,
3" will blink.
, Dial the CO numbers to be entered.
The desired combination of CO Line will be
displayed.
I
To prohibit ringing, press the CLEAR but-
ton instead
of
CO number.
"11: CO....." will be displayed.
%. Press the MEMORY button.
The blinking LCD will stop.
. Repeat steps 3 to 5, to program the assign-
ment
of
the other extensions.
7".
TO
return to the initial program mode, press
the END button.
2-16
s
When you start the programming from step 1,
you may dial the desired extension number
instead of the NEXT button at step 3.
The PREV button allows you to go to the
previous extension
for
displaying the CO
assignment.
Example: CO
Company XYZ would like all incoming calls to
at all extensions during the nighttime.
[Oil [NEXT] [Xl [1][2][3] [MEMORY] [END]
See page 5-1.5.