Co Connection Assignment; Description - Panasonic EASA-PHONE KX-T30810 Installation Manual

:-'--------'--'--.---- A=-%: to assign thesame on a113 CO's
T.-'.'--....
until the desired dial mode appears
i
CONNECT. . . . . . . . default (al13 CO's)
NO CONNECT
[02] [NEXT] [ii] [SELECT] [MEMORY] [END]
;2] [NEXT] [NEXT] [SELECT] [MEMORY] [END]
L--until the desired CO number appears
s
You can program that which outside line is
connected and which one is not connected.
When an extension automatically selects an idle
outside line, the extension can be connected to it
quickly.
"CO CONNECTION" will be displayed.
. Press the NEXT button.
"ENTER CO NO" will be displayed.
3. Press the NEXT button.
"CO 1: CONNECT" will be displayed and
"CONNECT" will blink.
. Press the SELECT
button, to alternate be-
tween CONNECT and NO CONNECT to
select the desired mode.
. Press the MEMORY button.
The blinking LCD will stop.
. Repeat steps 3 to 5, to program the dialing
mode on the other CO lines.
7. To return to the initial program mode, press
the END button.
When you start the programming from step I,
you may dial the desired CO number instead of
the NEXT button at step 3.
The PREV button allows you to see the entry
status in the previous CO connection assign-
ment.
Example:
CO 1 and 2 . . . CONNECT
CO 3 . . . . . . . . . . . . . . . . . . NOCONNECT
. [02] [NEXT] [(NEXT) or (l)] [
2. [NEXT] [MEMORY]
3. [NEXT] [SELECT] [MEMORY] [END]
e
See page 5-14.
3-R