Intercom Alerting Mode - Panasonic EASA-PHONE KX-T30810 Installation Manual

_.......... until the desired mode appeurs
TONE
CALL.. . . . . . . . . . . . . . . . default (all 8 extensions)
VOICE CALL
I
[21] [NEXT] [AB] [SELECT] [MEMORY] [END]
;;;] [NEXT] [NEXT] [SELECT] [MEMORY][END]
L---- until the desired extension number appears
The intercom alerting mode (tone alertinglvoice
alerting) at a receiving extension can be selected
through programming.
NE...Tone alerting (ringing) sounds at the
receivitzg extension.
VOICE.. Voice alerting instead of Tone alerting
is heard through the speaker on the
receiving extension.
1. dial (21).
"INTCOM CALL MODE" will be display-
ed.
2. Press the NEXT button.
"ENTER EXT NO" will be displayed.
3. Press the NEXT button.
"11: TONE CALL" will be displayed and
"TONE" will blink.
. Press the SELECT button to alternate be-
tween TONE CALL and VOICE CALL to
select the desired mode.
. Press the MEMORY button.
The blinking LCD will stop.
. Repeat steps 3 to 5 to program the call mode
of
the other extensions.
7. To return to the initial progratn mode, press
the END button.
2-D
When you start the programming from step 1,
you may dial the desired extension number
instead
of
the NEXT button at step 3.
The PREV button allows you to go to rhe
previous extension
for
displaying the alerting
mode.
VOICE CALL on the extension 13
[21] [NEXT] [13] [SELECT] [MEMORY]
[END1
e
See page 5-16.