Nokia 3250 User Manual page 80

Use callback > Yes
server to call you back once you have
made the initial call. Contact your
service provider to subscribe to this
service.
The phone expects the callback call
to use the same data call settings
that were used in the
callback-requesting call. The
network must support that type of
call in both directions, to and from
the phone.
Callback type — The options are
server no. and Use other
service provider for the correct
setting to use.
Callback number — to enter your
phone number which the dial-back
server uses. Usually, this number is
the data-call phone number of your
phone.
Use PPP compress.
data transfer, select
by the remote PPP server. If you have
problems with establishing a
connection, select No. Contact your
service provider for guidance.
Use login script >
login script when establishing the
connection.
Login script —to insert the login
script.
Modem initialisation
initialization string) — to control
Copyright © 2006 Nokia. All rights reserved.
— to allow a
Use
no.. Ask your
— To speed up
Yes if supported
Yes — to use a
(modem
your phone using modem AT
commands. If required, enter
commands specified by your service
provider or Internet service provider.
Packet data
The packet data settings affect all
access points using a packet data
connection.
Select Menu > Tools
Connection > Packet data
the following options:
Packet data conn.
When available and you are in a
network that supports packet data,
the phone registers to the GPRS
network and short messages are sent
using GPRS. Also, starting an active
packet data connection, for
example, to send and receive e-mail,
is quicker. If you select
needed, the phone uses a packet
data connection only if you start an
application or function that needs it.
The GPRS connection can be closed
when it is not needed by any
application.
If there is no GPRS coverage and you
have chosen When
phone periodically tries to establish
a packet data connection.
Access point — The access point
name is needed when you want to
use your phone as a packet data
modem to your computer.
T o o l s
> Settings >
and from
— If you select.
When
available, the
69