Service Command Editor; Messaging Settings - Nokia 3250 User Manual

numbers, contact your service
provider. To turn on the service, see
Cell broadcast settings in
broadcast settings"
Select Menu > Messag.
Cell broadcast. In the message list,
you can see the status of the topic,
the topic number, topic name, and
whether it has been flagged
follow-up.
A packet data connection may
prevent cell broadcast reception.
■ Service command
editor
To enter and send service commands
(also known as USSD commands)
such as activation commands for
network services to your service
provider, select Menu
Options > Service
send the command, select
Send.

■ Messaging settings

Text message settings
Select Menu > Messag.
Settings > Text message
the following options:
Message centres — lists all the
defined message centers.
Copyright © 2006 Nokia. All rights reserved.
"Cell
on page 29.
> Options >
for
> Messag. >
command. To
Options >
> Options >
and from
Msg. centre in use
message center is used for delivering
text messages and special message
types such as business cards.
Character encoding
to select all characters in the
message to be sent as viewed. If you
select Reduced support, characters
with accents and other marks may
be converted to other characters.
Receive report — When set to Yes,
the status of the sent message
(Pending, Failed, Delivered) is shown
in Reports (network service).
Receiving a delivery report of a
multimedia message that has been
sent to an e-mail address may not be
possible.
Message validity — If the recipient
of a message cannot be reached
within the validity period, the
message is removed from the
message service center. Note that
the network must support this
feature. Maximum time
maximum amount of time allowed
by the network for which the
message remains valid.
Message sent as — to define how the
message is sent. Default is Text.
Preferred conn. — You can send text
messages using the normal GSM
network or GPRS, if supported by the
network.
M e s s a g i n g
— defines which
> Full support —
— the
25