Nokia 3250 User Manual page 77

T o o l s
Call
Select Menu > Tools
Call and from the following options:
Send my caller ID (network service) —
to set your phone number to be
displayed (Yes) or hidden (No) from
the person whom you are calling.
The value may be set by your
network operator or service provider
when you subscribe to the service
(Set by network).
Call waiting (network service) — to
set the network to notify you of a
new incoming call while you have a
call in progress. To request the
network to activate call waiting,
select Activate. To request the
network to deactivate call waiting,
select Cancel. To check whether the
function is active, select
status.
Reject call with SMS
rejecting phone calls with a text
message. See "Answer or reject a
call" on page 13.
Message text — to enter a text to be
sent in a text message when you
reject a call.
Automatic redial — to set the phone
to make a maximum of 10 attempts
to connect the call after an
unsuccessful call attempt. Press the
end key to stop automatic redialing.
66 Copyright © 2006 Nokia. All rights reserved.
> Settings >
Check
— to enable
Summary after call
phone to briefly display the
approximate duration of the last
call.
Speed dialling > On
phone to dial the numbers assigned
to the speed dialing keys 2 to 9 by
pressing and holding the
corresponding number key.
Anykey answer > On
incoming call by briefly pressing any
key, except the right selection key,
the power key, and the end key.
Line in use (network service) — this
setting is shown only if the SIM card
supports two subscriber numbers,
that is, two phone lines. Select
which phone line
you want to use for making calls and
sending short messages. Calls on
both lines can be answered
irrespective of the selected line.
You cannot make calls if you select
Line 2 and have not subscribed to
this network service.
To prevent line selection, select
change > Disable
your SIM card. To change this
setting, you need the PIN2 code.
Connection
Your phone supports packet data
connections , such as GPRS in the
GSM network. See
page 7. To establish a data
— to set the
— to set the
— to answer an
(Line 1 or Line 2)
Line
if supported by
"Indicators" on