Multimedia Messaging Settings - Nokia 3250 User Manual

M e s s a g i n g
Reply via same ctr.
If you select Yes, and the recipient
replies to your message, the return
message is sent using the same
message service center number. All
networks do not provide this option.
For availability, contact your
network operator or service provider.
Multimedia messaging
settings
Select Menu > Messag.
Settings > Multimedia message
from the following options:
Image size — Define the size of the
image in a multimedia message:
Small (max. 160 x 120 pixels) or
Large (max. 640 x 480 pixels). If you
select Original, the image is not
scaled.
MMS creation mode
Guided, the phone informs you if you
try to send a message that may not
be supported by the recipient. To set
the phone to prevent you from
sending messages that are not
supported, select
select Free, message creation is not
restricted, but the recipient may not
be able to view your message.
Access point in use
access point is used as the preferred
connection for multimedia
messaging. See "Receive multimedia
messaging settings"
26 Copyright © 2006 Nokia. All rights reserved.
(network service) —
> Options >
and
— If you select
Restricted If you
— Select which
on page 20.
If you receive multimedia message
settings in a message and save them,
the received settings are
automatically used for the access
point. See "Special message types"
on page 21.
Multimedia retrieval
multimedia messages only when you
are in your home network, select
Auto. in home network. When you
are outside your home network,
multimedia message reception is
turned off. To always receive
multimedia messages, select
automatic. To retrieve messages
manually, select Manual. To not
receive any multimedia messages or
advertisements, select Off.
Allow anon. msgs.
messages coming from an
anonymous sender, select No.
Receive adverts — Define whether
you want to allow reception of
multimedia message
advertisements.
Receive report — If you want the
status of the sent message (Pending,
Failed, or Delivered) to be shown in
Reports, select Yes.
Deny report sending
sending delivery reports.
Message validity (network service) —
If the recipient of a message cannot
be reached within the validity
period, the message is removed from
— To receive
Always
— To reject
> Yes — to deny