• Never drop or insert objects into any opening. vous avez des étourdissements ou des faiblesses, or service, refer to the Precor web site at Keep hands away from moving parts. arrêtez les exercices immédiatement. www.precor.com. Should you need more •...
Unpacking the Equipment The Multi-Hip Option is carefully tested and inspected before shipment. Precor Strength ships the unit in several pieces that require assembly. Ask for assistance during the assembly process. Multi-Hip Option •...
S3.15 Multi-Hip Option Assembly Instructions Installation Requirements • Most fasteners are inch unless otherwise noted. To find out the length of a particular fastener, Follow these installation requirements when measure its shank (the long, narrow part beneath assembling the unit: the head).
S3.15 Multi-Hip Option Assembly Instructions Assembly Instructions Assembly of the Multi-Hip Option takes professional installers about hour to complete. If this is the first Selector Hub time you have assembled this type of equipment, plan on significantly more time. Professional installers are highly recommended!
Crossbar two 4 -inch hex head bolts four radius washers two locknuts Multi-Hip Note: If you plan to install the S3.15 Leg Press Upright Spring Option immediately after you complete the Multi- Washer Hip Option assembly, place two washers and two locknuts on the fastener ends finger tight so they provide stability, but can easily be removed.
S3.15 Multi-Hip Option Assembly Instructions 2. Assemble the Multi-Hip Important: The orientation of the Handlebar fasteners, Selector Hub the Roller Arm, and the Selector Stem is critical for the proper alignment of the Selector Hub. Assemble the 2 - 2½" bolts parts with the orientation shown in the illustration.
S3.15 Multi-Hip Option Assembly Instructions 3. Install the Multi-Hip Cable Pulley assemblies A. Feed the tab end of the Multi-Hip Cable 130194 3½-inch Pulley (used on gray between the two 3½-inch pulleys on the Multi-Hip painted parts) Upright and attach the cable to the Selector Hub...
S3.15 Multi-Hip Option Assembly Instructions 4. Attach the Multi-Hip Cable to the S3.15 A. Attach the end of the Multi-Hip Cable to the S3.15 Cable using one 1-inch hex head bolt one locknut B. Wrench tighten the locknut, but do not bend the flanges.
Satisfactory proof of purchase is required in all cases. For any product described above that fails to conform to its warranty, Precor will provide, at their option, one of the following: (1) repair; (2) replacement; or (3) refund of the purchase price. Precor Limited Warranty service Conditions and Restrictions may be obtained by contacting the authorized dealer from whom you purchased the item.
Page 14
Please detach and mail in the warranty registration within ten days of purchase.
Precor is widely recognized for its innovative, award winning designs of exercise equipment. Precor aggressively seeks U.S. and foreign patents for Warranty Registration 45623-102 both the mechanical construction and the visual aspects of its product design. Any party contemplating the use of Precor’s product designs is hereby Warranty Card # 36287-110 forewarned that Precor considers the unauthorized appropriation of its proprietary rights to be a very serious matter.
Need help?
Do you have a question about the move beyond S3.15 and is the answer not in the manual?
Questions and answers