Pioneer RM-V1000NU Technical Manual page 109

APPENDIX (MVP manual)
5. Adjustment Mode
¶ NTSC Input Board Adjustment Mode:
Mode in which the adjustment commands of the NTSC input board can be executed.
(Adjustment items of the output board can be executed when desired)
To end the adjustment mode, input AJN.
Operation mode
AJYB Enables the NTSC input board to be adjusted.
AJN
Power ON
Normal mode
!
@h
Operation mode
¶ Option RGB board adjustment mode:
Mode which enables communication with the optional RGB board (RMD-V3020).
In this mode, only the RGB board adjustment command is accepted. The operations of
each switch on the front panel are not accepted.
In particular, when Mode switches are operated, the video output will be disrupted. Set
the switches properly after ending the communication mode.
Operation mode
:A Sets into the communication (adjustment) mode with the RGB board.
: Ends the RGB board adjustment mode.
108
Adjustment mode end
AJYB
AJN
NTSC input board adjustment mode