Setting A Voice Command For Category - Kenwood DPX404U Instruction Manual

Function of DPX504U with KCA-BT200/BT300 (Optional Accessory)
Bluetooth Setup
Setting a Voice Command for
Category
Add a voice tag to the phone number category
(type) for voice calling.
1
Enter Bluetooth mode
Press the [LOG] button for at least 1 second.
2
Enter Phone Number type edit mode
Turn the [VOL] knob and press it when the
desired item is displayed.
>
Select "Settings" "Voice Tag"
3
Select the category (type) you wish to set
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "General", "Home", "Office", "Mobile", or
"Other"
4
Select a mode
Turn the [VOL] knob.
Display Operation
"PN Type Regist. " Register a voice tag.
"PN Type Check"* Play a voice tag.
"PN Type Delete"* Delete a voice tag.
* Displayed only when a name for which a voice tag has
been registered is selected.
5
Register the category (type) by performing
steps 5 to 7 in <Adding a Voice Dialing
Command> (page 67).
6
Exit BT Settings mode
Press the [LOG] button for at least 1 second.
⁄
•
Set the voice tag for all the 5 categories. If the voice tag is
not registered for all the categories, the Phone book may
not be recalled by voice command.
68
|
DPX504U/ DPX404U/ DPX304
>
"PN Type Edit".