Registering Bluetooth Device - Kenwood DPX404U Instruction Manual

Function of DPX504U with KCA-BT200/BT300 (Optional Accessory)
Bluetooth Setup
Registering Bluetooth device
To make your Bluetooth device (cell-phone) usable
with this unit, you need to register it (pairing). You
can register up to 5 Bluetooth devices to this unit.
Registering from this unit
1
Enter Bluetooth mode
Press the [LOG] button for at least 1 second.
2
Enter Bluetooth device registration mode
Turn the [VOL] knob and press it when the
desired item is displayed.
>
Select "Settings" "PAIRING"
Registration".
Search for the Bluetooth device.
When search is completed, "Finished" is displayed.
3
Select a Bluetooth device
Turn the [VOL] knob and press it when the
desired item is displayed.
4
Input the PIN code
Operation type Operation
Select the numbers. Turn the [VOL] knob.
Move to the next digit. Press the [¢] button.
Delete the last digit. Press the [4] button.
5
Transmit the PIN code
Press the [VOL] knob.
If "Pairing Success" is displayed, registration is
completed.
✍ If the error message appears even though the
PIN code is correct, try
Bluetooth device> (page
6
Return to the device list
Press the [ ] button.
7
Exit BT Settings mode
Press the [LOG] button for at least 1 second.
⁄
•
This unit allows up to eight digits to be input for a PIN code.
If a PIN code cannot be input from this unit, it can be input
from the Bluetooth device.
•
If there are 5 or more Bluetooth devices registered, you
cannot register a new Bluetooth device.
Registering Special Bluetooth device
Allow registration of a special device that cannot be
registered normally (pairing).
1. Select Special device registration mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "Settings" > "PAIRING"
64
|
DPX504U/ DPX404U/ DPX304
>
"Device
<Registering Special
64).
> "Special Device
Select".
2. Enter Special device registration mode
Press the [VOL] knob.
A list is displayed.
3. Select a device name
Turn the [VOL] knob and push the center when
the desired device name is displayed.
If "Completed" is displayed, registration is
completed.
4. Go through the procedure step 3 of
<Registering from this unit> (page 64)
complete the registration (pairing).
Cancelling Special device registration mode
Press the [ ] button for at least 1 second.
⁄
•
If the device name is not in the list, select "Other Phones".
and