Car Type Fine Adjustments - Kenwood DPX404U Instruction Manual

Car Type Fine Adjustments
Adjusting fine tuning of the speaker position
compensation value specified at
Selection> (page 54).
Display Item
"FRONT" Front speaker
"REAR" Rear speaker
"SW" Subwoofer
1
Select the source
Press the [SRC] button.
Select a source other than "STDBY".
2
Enter Function setting mode
Press the [VOL] knob.
3
Enter Car Type Adjustment mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "Audio Control"
"Car Type Adjust".
4
Select the item you want to set
Operation type
Selects the item.
Adjust each item.
Set the value
The settings of the delay time are automatically
identified and compensated by specifying the
distances of each speaker from the center of the
vehicle interior.
1 Set the front and rear positions and the height
of the reference point to the position of the ears
of the person sitting in the front seat, and set
the right and left positions to the center of the
vehicle interior.
2 Measure the distances from the reference point
to the speakers.
3 Calculate the distance difference in accordance
with the farthest speaker.
<Car Type
Range
0 – 440 cm
0 – 440 cm
0 – 440 cm
( : Factory setting)
> >
"Detailed Setup"
Operation
Turn the [VOL] knob.
Press the [4] or [¢] button.
Press the [VOL] knob.
Reference point
FRONT
REAR
5
Exit Function setting mode
Press the [ ] button for at least 1 second.
FRONT
REAR
SUB-W
55
|
English