Fibre Channel Over Ethernet: Broadcom NetXtreme II Network Adapter User Guide
3. Select the boot LUN to be installed:
4. Continue with the rest of the installation. After installation is complete and booted to SAN, execute the provided
Windows driver installer and reboot. Installation is now complete.
NOTE: The boot initiator must be configured to point at the desired installation LUN, and the boot initiator must
have successfully logged and determined the readiness of the LUN prior to starting installation. If these requirements
file:///T|/htdocs/NETWORK/BroadCom/71921/NetXtremeII/en/fcoe.htm[9/26/2012 3:29:33 PM]