Dell Broadcom NetXtreme Family of Adapters User Manual page 129

Fibre Channel Over Ethernet: Broadcom NetXtreme II Network Adapter User Guide
3. Ensure DCB/DCBX is enabled on the device. FCoE boot is only supported on DCBX capable configurations. As such,
DCB/DCBX must be enabled, and the directly attached link peer must also be DCBX capable with parameters that allow
for full DCBX synchronization.
4. For Dell 57712 NDC-based systems (for example, M710HD, M915), set the boot protocol through system BIOS
configuration in the integrated devices pane as described above.
file:///T|/htdocs/NETWORK/BroadCom/71921/NetXtremeII/en/fcoe.htm[9/26/2012 3:29:33 PM]