Table of Contents
Advertisement
System requirements
The following hardware and software are required to transfer audio
data from a PC to the unit.
Hardware and software requirements *1
Computer
IBM PC/AT-compatible
®
OS
Microsoft
Millennium Edition/2000 Professional/XP
Professional/XP Home Edition standard
installation *2/ Mac OSX 10.2.6 above
Software
Windows Media
Drive
CD-ROM drive
Interface
Available USB port (USB 2.0/1.1)
*1 Operation is not guaranteed on all the compatible computers.
*2 Operation is not guaranteed on computers running upgraded OS
or multiple OS with dual-boot.
®
Windows
98 Second Edition/
®
Player 9 Series or 10
SD/MMC card installation
1. Insert the SD or MMC card as below figure.
Notes:
● Be sure to turn off the unit before inserting or removing the SD/
MMC card.
If the set is on, removing or inserting the SD/MMC card can cause
some data to be lost or the set to freeze or become inoperative. If
this should be happen, please reset it by pressing the RESET
button at the back of the unit.
● SHARP will not be held liable for the loss of data whilst the SD/
MMC memory device is connected to the audio system.
● Files compressed in MP3 and / or WMA format can be played
back when connected to the SD terminal.
● This SD/MMC memory's format support FAT 16 or FAT 32.
● SHARP cannot guarantee that all SD/MMC memory devices will
work on this audio system.
● The SD terminal in this unit is not intended for a PC connection
but is used for music streaming with a SD/MMC memory device.
● The larger the capacity of the SD/MMC storage device, the longer
it will take for the data to be read.
● SD/MMC card is not included.
● SD/MMC card can not operate if battery power is low.
Caution:
Must create folder name as "MVIDEO", "PHOTO" and "EBOOK" into
the SD/MMC card for playback data.
This products unable to playback the file format data (smv, jpeg/bmp,
text) without create above folder or place outside the folder.
WA-MP40(W)/(BK)
WA-MP400(W)/(BK)
ENGLISH
SD/MMC Card
E-5
Advertisement
Table of Contents
