Recording; Recording With The Built-In Microphone - Sharp WA-MP40W Operation Manual

Recording with the built-in microphone

Check the memory status beforehand. If the memory is low, move
some data to a PC to make some room.
Note:
This microphone is monaural
directional. However, it is recommended to direct
it towards the source for better recording.
1
Press the POWER button to turn the power on.
2
Press or button to select "Mic Record" and press
MENU button, recording will be started.
Mic Record
To interrupt recording:
Press button.
To resume recording, press the
To save recording:
Press the MENU button. Data will be saved.
Note:
Data recorded with the built-in microphone are named automatically,
i.e V001.WAV, V002.WAV... etc.
Newly saved files are numbered sequentially following the largest
number among the existing file names. It is recommended to delete
or move some files to PC.
For long recording time, "Saving ..." indicator will appear after a few
seconds (Data saved).
and omni-
MUSIC
R
0 : 0 2 : 2 0
/VOICE/V002.WAV
Remaining Time : 00:50:48
button again.
■ Changing sound quality for microphone

recording

1
At main menu screen, press the
"SETUP" and press the MENU button.
MUSIC
2
Within 40 seconds, press the
"Record Settings" then press MENU button.
Settings
PlayMode
E q
D i s p l a y
P o w e r
R e c o r d S e t t i n g s
3
Within 20 seconds, press the
"Rate" and press the MENU button repeatly to select the
desired sound quality for recording.
Normal
To return to settings menu, select "Exit" and press the MENU
button.
or button to select
Settings
PlayMode
Eq
Display
Power
R e c o r d S e t t i n g s
or button to select
Record Settings
Source: Mic
R a t e : Middle
Exit
or button to select
Middle High
WA-MP40(W)/(BK)
WA-MP400(W)/(BK)
ENGLISH
E-25