Turning The Unit On/Off; Hold Function - Sharp WA-MP40W Operation Manual

Turning the unit on/off

WA-MP40(W)/(BK)
WA-MP400(W)/(BK)
ENGLISH
■ To turn on the unit
Press the POWER button.
■ To turn off the unit
Hold down the POWER button for 3 seconds or more.
■ Volume control
At music function, video function and
FM radio function, press VOL – or +
button to decrease or increase the
volume.
■ Volume auto set-in
● If you turn off and on the main unit with volume set to 18 or higher,
the volume will start at 18.
● If you turn the unit off then on again with the volume level set to
less than 17, it will turn on again at the level set.
E-8
Check Card
Continue holding
to power off
Good Bye!
MIN ..........
39
Example: music mode

Hold function

When the hold function is turned on, all buttons on the unit will be
inactive. To make changes to the operation of the unit, turn the
HOLD switch off. "
turned on.
MUSIC
Move the HOLD switch to the safety position (direction indicated by
the arrows).
Note:
If the hold function is active when the unit is turned off, the unit cannot
be turned on by mistake and the battery will not be drained.
18
MAX
" icon will display on screen if hold function is
Hold Release
Red mark
Locked