Advertisement
To
preservenaturalresources,please
recycleor disposeof batteriesproperty.
This productcontains nickel-cadmium
battefles. Local, state or federel laws
may prohibitdisposalof nickel-cadmium
batteries In ordinarytrash,
Consult your localwaste authorityfor Information
regardingavailable recyclingand/or disposaloptions.
BATTERY
REMOVAL, PREPARATION
FOR RECY-
CLING
See Figure 9.
TO REMOVE:
•
Remove the three screwssecudng motor housing
cover then remove cover.
Lift battefles from motorhousingenough to expose
leads and battery terminals. Disconnectleads from
batteryterminals, Note: Be careful not to break
battery leads when disconnectingleads.
WARNING:
Upon removal, cover the batter/
terminals with heavy duty adhesivetape. Do not
attemlXto destroy or disassemble battedes or
remove any of its components. Nickel-cadmium
batteries mustbe recycledor disposedof properly.
Also, never touch bothterminals with metal objects
and/or body parts as short circuitmay result. Keep
away from children.Failure to comply with these
warningscould result In fire and/or sedous Injury.
COVER
\
SCREW(S)
BAI"rERY
LEAD
T
BATrERIES
BATrERY
LEAD
MOTOR
HOUSING
Fig. 9
The followingrecommendedaceessofles are currentlyavailable at Sears Retail Stores,
•
No. 2 Phillips/ 8-10 Slotted, 2 Ea.
•
7-Pc. Screwdriver Bit Set and Case
•
No. 3 Phillips/ 6-8 Slotted, 2 Ea.
•
13-Pc. Power Screwdriver/NutddvarSet and Case
•
5-Pc. Hex Shank Ddll Bit Set
•
17-Pc. Power ScrewdrlverlNutdrlver Set and Case
•
6-Pc. Extra Length Magnlte Power Bit Set
•
30-Pc. Power Screwddver/NutddverSet and Case
AWARNING:
The use of attachmentsor acsessodes not listedmight be hazardous.
12
Advertisement
