Dell PowerEdge UPS 500T Installation And Configuration Manual page 95

2 To reboot all computers, select the Select all check box and click OK.
3 To reboot individual computers:
Enter the MAC address for the computer. You can use the ipconfig –all command to
a
identify the MAC address of the computer.
NOTE:
DO NOT enter the dash (-) of the MAC address.
Click Add.
b
Repeat for each computer that should be rebooted when the utility power restores.
c
4 Dell recommends to test the reboot function.
To test the reboot function, select the computers from the list and click Test. The computers should
reboot.
Configuring the Software
95