Shutdown Remote Agents - Dell PowerEdge UPS 500T Installation And Configuration Manual

Shutdown Remote Agents

To configure for shutting down remote Agents:
1 Click the Add button in the Shutdown Conditions area.
The Shutdown Remote Agents window opens (see Figure 64).
Figure 64. Shutdown Remote Agents Window
2 Select Shutdown or On Battery:
When the UPS of the Agent is going to shut down and Shutdown is selected, the software sends the
shutdown command to the remote computers at the IP addresses that are listed in the Shutdown
Remote Agents window.
When On Battery is selected, the software sends the shutdown command to the remote computers
when the time of the UPS transfer to battery exceeds the specified time.
3 Select the Load Segment that powers the computer.
4 Enter the IP address (IPv4 address or IPv6 address) or host name and then click Add for each Agent to
be shut down.
5 Click OK to save and exit.
Configuring the Software
64