Removingchuck And Arbor - Craftsman 113.213170 Owner's Manual

3 Turn the depth scale clockwise until it stops.
4, Tighten the depth scale lock,
5. The chuck will now be held at this depth when the
feed handles are released,
OEPTH SCALE
LOCK
SCALE
REMOVING CHUCK AND ARBOR
1. With switch off -- adjust depth scale to hold drill
at a depth of (3) three inches. (See instructions for
"Locking chuck at desired depth").
2. Align key holes in spindle and quill by rotating the
chuck by hand. (See illustration)
3. Insert key wedge into key holes.
4. Tap key wedge lightly until the chuck and arbor
fall out of spindle.
NOTE: Place one hand below chuck to catch it when
it falls out.
ml
SPINDLE KEY
HOLE
QUILL KEY
HOLE
1 ii
ARBOR
LOCKING
COLLAR
CHUCK
SLEEVE
"._ "o
O r-
n-
\
WEDGE KEY
CHUCK
SLEEVE
BODY
21