Canon EOS-1DS Mark III Instruction Manual page 191

Troubleshooting Guide
No images can be shot or recorded.
® The memory card is not properly inserted. (p.32)
® Bfthe memory card is full, replace the card or delete unnecessary
images to make room.
Or if a not=full memory card is inserted in the other card slot, switch the
recording to that card. (p.32, 73, 128)
® Bfyou try to focus in the One=Shot AF mode while the focus
confirmation light <@> in the viewfinder blinks, a picture cannot be
taken. Press the shutter button halfway again to focus, or focus
manually. (p.36, 86)
The LCD monitor does not display a cleat image.
® Bfdust is adhering to the LCD monitor, wipe with a lens cloth or soft
cloth.
® In low or high temperatures, the LCD monitor display may seem slow
or it might look black, it wild return to normal at room temperature=
The image isout of focuso
® On the lens, set the focus mode switch to <AF>= (p.35)
® To prevent camera shake, hoBd the camera still and press the shutter
button gently. (p.36, 40)
The memory card is unusable.
® If a memory card error message is displayed, see page 48 or 193.
191