Auto Exposure Bracketing (Aeb) - Canon EOS-1DS Mark III Instruction Manual

Auto Exposure Bracketing (AEB)
By changing the shutter speed or aperture automatically, the camera
brackets the exposure up to ±3 stops in li3-stop increments for three
successive shots. This is called AEB.
* AEB stands for Auto Exposure Bracketing,
1
Homddown the <MODE> and
<AFoDRIVE> buttons
simumtaneously. (¢6)
_y,, T he <_> icon and "0.0" will appear
on the top LCD panel.
Set the AEB amount.
® Turn the <_:_/O> dial to set the
AEB amount.
® "1o0" is the AEB increment, and <l>
is the AEB amount.
Standard Decreased Inc,eased
exposure exposure exposure
100
,3
Take the picture.
® In the current drive mode, the pictures
will be taken in this sequence: Standard
exposure, decreased exposure, and
increased exposure=
® After the three bracketed shots are taken,
AEB will not be canceled. To canceJ AEB,
set the AEB increment to "0.0'L
As During AEB shooting. [he <_> icon in the viewfinaer and the <_> icon
on me _op LCD paneJ will blink
The AEB setting will be cancelea automatically it the power sw_tch is se_
Lo<OFF> or if the flash is ready
Wnen me snooting mode is bulb or you use flash. AEB cannot be usea
If the drive mode is set to single shooting <E3> or <S>, you must press the
shutter button three times. When <_IH> or <_L > is set and you hold do vn
me shutter button completely, the three bracketed shots wiJl be taken
continuously. Then the camera will stop shooting. When <@_e>or <@ 2> is
set. the three bracketed shots will be taken after a 10-sec. or 2-sec. dela_
AEB can also be combined with exposure compensation