Lights Came On And Then Went Out - Epson Stylus Photo 925 User Manual

LCD panel is off
Try one or more of these solutions:
Press the P power button to make sure that the printer is on.
Turn off the printer and make sure that the power cord is
securely plugged in.
Make sure that your outlet works and is not controlled by a
wall switch or timer.
Only the LCD panel is on
Try one or more of these solutions:
Make sure that there is no packing material in the printer.
If the printer sounds like it is trying to print, but is unable to,
run the Head Cleaning utility.
If this does not work, replace the ink cartridges. See
"Replacing an Ink Cartridge" on page 72 for instructions.
LCD panel displays a warning or error message
If the LCD panel displays a warning or error message, follow the
instructions. See "Error/Warning Display" on page 85 for the
explanation of warnings and error messages.

Lights came on and then went out

The printer's voltage may not match the outlet rating. Turn off the
printer and unplug it immediately, then check the printer labels.
97