Paper Is Not Ejected Fully Or Is Wrinkled; Printer Does Not Print - Epson Stylus Photo 925 User Manual

Paper improperly loaded
If you have loaded the paper too far into the printer, the printer
cannot feed the paper correctly. Turn the printer off and gently
remove the paper. Then turn the printer on and reload the paper
properly.

Paper is not ejected fully or is wrinkled

Try one or more of these solutions:
If the paper does not eject fully, press the
button, then open the printer cover and remove the paper.
Also, check the Paper Size setting in the Control Panel.
If the paper is wrinkled when it comes out, it may be damp
or too thin. Load a new stack.
Note:
Store any unused paper in its original packaging in a dry area. See
"Paper" on page 139 for specifications.

Printer Does Not Print

If the printer does not print, check and see if one of the following
error indications is displayed, then try the solutions listed.
LCD panel is off.
Only the LCD panel is on
(
The
One of the ink out lights is flashing or on
Ink out lights are on and the other lights are flashing
96
maintenance light is flashing or on
(
maitenance