Fujitsu ETERNUS VSS Hardware Provider 2.1 User Manual page 67

Chapter 8 Commands
8.8 Communication Environment Setup Command (stxvsetcommu)
●
When the IP address has not been registered in the registry.
The following window appears. Enter a new IP address and IP version.
If the communication environment setting for a production server is performed before the
communication environment setting for a backup server, the communication environment settings for
the production server fail.
The same IP version must be set for the production server and the backup server.
67
ETERNUS VSS Hardware Provider 2.1 User's Guide
Copyright 2012 FUJITSU LIMITED P3AM-4582-03ENZ0