Fujitsu ETERNUS VSS Hardware Provider 2.1 User Manual page 62

Table of Contents

Chapter 8 Commands

8.6 OLU Number Display Command (stxvgetolu)

■

Reference

●

Identifying if a command ends normally

An error has occurred if a message includes one of the following error levels:

"ERROR"

"WARNING"

●

Notes on identifying if a command ends normally

The following message appears if any disks other than disks in the ETERNUS Disk storage system

are detected with this command.

"STXV0603 INFO Disk is not a Disk Storage Systems."

This message does not mean an error has occurred. This message indicates that the detected disk

is not a LUN from the ETRERNUS Disk storage system. If a device other than the ETERNUS Disk

storage system is connected to, this message always appears. When this message is displayed,

determining the relevance of the contents of this message may be required.

The output of this message can be checked with the following message number:

"STXV0603"

An example of an output message is shown below.

When all of the OLU information is output in an environment in which an internal disk and the

ETERNUS Disk storage system are connected..

> stxvgetolu

Disk,

When the OLU information of an internal disk with the specified disk number is output in an envi-

ronment in which an internal disk and the ETERNUS Disk storage system are connected.

> stxvgetolu -p 0

Disk,

OLU,

BoxID/Message,

STXV0603 INFO Disk is not a Disk Storage Systems.

0x000a, 00E2000#######E210S4B#####JD4170832013##,---,-

OLU,

BoxID/Message,

STXV0603 INFO Disk is not a Disk Storage Systems.

ETERNUS VSS Hardware Provider 2.1 User's Guide

VOL,Maxgen

P3AM-4582-03ENZ0

Table of Contents