Dell PowerEdge M620 Owner's Manual page 65

Table 1-16. I/O Module Port Assignments—Full-Height Blades
applicable for PowerEdge M610x)
n
Blade and Blade (
NOTE:
n denotes a variable
value from 1 to 8.
Mezz_FAB_C_Blade
n+8_Port2
Mezz_FAB_C_Blade
n+8_Port3
Mezz_FAB_C_Blade
n+8_Port4
NOTE:
Even though PowerEdge M610x is a full blade system, only two mezzanine
card slots (MEZZ1_Fab_C1 and MEZZ2_FAB_B1) in the expansion bay are available
for use. The other two slots on the system board (MEZZ1_FAB_C and
MEZZ2_FAB_B) are occupied by the mezzanine interface card which provides
connectivity between the PCIe expansion-card riser and the system board.
Table 1-17 illustrates the I/O module port mapping for PowerEdge M610x
in bay n.
Table 1-17. Example of I/O Module Port Assignments - PowerEdge M610x Blade 1
Blade 1
Mezzanine
Card C (port 1
and port 2)
Mezzanine
Card C (port
3and port 4)
Mezzanine
Card B (port 1
and port 2)
Mezzanine
Card B (port 1
and port 2)
n
+ 8)
B1
A1 B1
Port 9
Port 25
I/O Module
C1 C2
Port
(n+8)
Port
(n+24)
Port
(n+24)
I/O Module
C1 C2
Port 9 Port 9
Port 25 Port 25
About Your System
(continued)
(not
B2
B2 A2
Port 9
Port 25
65