Dell PowerEdge M620 Owner's Manual page 116

Table 1-27. Blade Messages
Message
Warning: PCIe
expansion riser
not found. Check
mezzanine
interface card and
cables.
Error: Unsupported
mezzanine card
configuration.
Verifying blade
power...
Cannot Power ON.
Cables are not
installed properly
or Mezz IFC FRU is
corrupted
Expansion Cables
are not installed
properly
116
About Your System
(continued)
Causes
This warning occurs if
BIOS does not discover
the expansion-card riser
during POST. BIOS
continues with POST after
displaying this warning to
the console.
NOTE:
Applicable to M610x
only.
This error occurs if the
type and configuration of
mezzanine cards installed
are not supported.
Status message that BIOS
is waiting for
iDRAC/CMC to grant
power to the blade before
proceeding with POST.
The cables in expansion
are not installed properly
or Mezz IFC FRU is
corrupted.
NOTE:
Applicable to M610x
only.
PCIe expansion cables not
installed properly.
NOTE:
Applicable to M610x
only.
Corrective Actions
Ensure that the expansion-
card riser is installed in the
system, If applicable,
reinstall the expansion-card
riser and check all cable
connections. See
"Expansion-Card Riser
(PowerEdge M610x Only)"
on page 239.
If the problem persists, the
expansion-card riser may be
faulty. See "Getting Help" on
page 361.
Ensure that the mezzanine
cards installed are supported
by the blade. See "I/O
Module Mezzanine Cards"
on page 217.
Information only.
Ensure that PCIe expansion
cables are connected
properly. If required, reseat
the Mezz IFC FRU. If the
problem persists, see
"Getting Help" on page 361.
Ensure that PCIe expansion
cables are connected
properly.