File - Fagor CNC 8070 Operating Manual

6.3.2

File

It is used to restore, save, import or print a program.
When selecting this option, the softkey menu shows the available options. To return
to the main menu, press the key for the previous menu.
File "Restore original"
This option is only available when the "auto save" option is active. See
"6.3.6 Customizing"
It is used to restore the original program without the changes made since the last time
it was opened. When selecting this option, the CNC requests confirmation of the
command:
Keys to move the cursor
File "Save"
This option is only available when the "Manual save" option is active. See
"6.3.6 Customizing"
To save the program being edited.
File "Save as"
It is used for saving a program that is being edited with a different name. After saving
the program, one may continue editing the new program
When selecting this option, the CNC shows a list with all the programs already saved.
Keys for selecting a file
To save a program with another name:
1. Select the destination folder.
2. Write the program name in the bottom window. To replace an existing program,
select it from the list
3. Press [ENTER] to save the program or [ESC] to return to the editor without saving
the program.
Once the program has been saved, the top of the editing window will show the name
of the new program.
on page 107.
Moves the cursor through the selection buttons.
Applies the option selected with the cursor.
on page 107.
To switch windows.
To close and open a folder submenu.
To move the cursor thru the elements of the window.
To save the new program.
To cancel the selection and close the program listing.
Operating manual
6.
CNC 8070
(S V03.0 )
OFT X
103