Fagor CNC 8070 Original Instructions Manual
Hide thumbs
Also See for CNC 8070:
- Programming manual (556 pages) ,
- Operating manual (414 pages) ,
- Hardware configuration (276 pages)
Related Manuals for Fagor CNC 8070
Summary of Contents for Fagor CNC 8070
- Page 1 FAGOR AUTOMATION CNC 8070 Ordering Handbook Ref.1702 Original instructions FAGOR AUTOMATION...
- Page 2 (1) Depends on the type of function Spindles From 1 to 6 (2) Products manufactured by FAGOR AUTOMATION since April 1st 2014 will include "-MDU" in their identification if they are included on the list of dual-use products according to Axes From 3 to 28 regulation UE 428/2009 and require an export license depending on destination.
-
Page 3: Central Unit
CNC 8070 OL CONFIGURATION CENTRAL UNIT Code Model Description 83701024 8070-OL-ICU-RS Integrate Central Unit for General Purpose machines (a) 83701030 8070-OL-MCU-RS Modular Central Unit for General Purpose machines Central Unit components Code Model Description 83700065 SER-CAN-8I-8IO-A Sercos-Can module 83700047 MCHTR-CAN-8I-8IO... -
Page 4: Software Options
Sercos driver system 83740007 SOFT PROBE (3) ( A ) Probe 83740042 SOFT DIGIT NO FAGOR NO Fagor digital drive system 83740010 SOFT C AXIS C axis 83740034 SOFT TANDEM AXES 2 axes acting as Tandem (Backlash rack & Pinion) - Page 5 The IEC 61131 is PLC programming language, very popular on alternative markets and is entering the machine-tool market little by little. When activating this feature, the PLC may be programmed either in the usual Fagor language or in IEC 61131 format.
-
Page 6: Remote I/O Modules
CNC 8070 OL ACCESORIES Code Model Description 83760005 CNC FPU Fagor Power Unit 83700075 TRANSP-KEYS & EXTRACTOR 20 transparent key caps and an extractor tool 83700076 TRANSP-KEYS 20 transparent key caps 83700077 WHITE-KEYS 20 white key caps REMOTE I/O MODULES Are easy to install, they can be mounted at strategic points of the machine for having extra inputs and outputs distributed next to each device. - Page 7 CNC 8070 OL REMOTE I/O MODULES REMOTE MODULES - RIO5 serie RIO5 series. Remote modules with CANopen protocol RIO5 PS-24I/16O........... 83070015 Header module with power supply, 24 digital inputs and 16 digital outputs RIO5 PS-2PT100/4AI/4AO........83070018 Header module with 4 analog inputs, 4 analog outputs and 2 inputs for PT100 temperature gages RIO5 24I/16O EXP MOD........
- Page 8 CNC 8070 OL CENTRAL UNIT IN ELECTRICAL CABINET Ready Made cables for passive monitor, CAN Bus (CAN CABLE) and Sercos ring (SFO & SFO-FLEX). SERCOS CABLE CABLE DRIVE SYSTEM CABLE REMOTE CENTRAL UNIT IN MODULES GROUP ELECTRICAL CABINET CAN CABLE DRIVE System Each drive module having the Sercos interface option offers a small cable for connecting it to the adjacent module.
- Page 9 M.CN8070 USER (ALE) User manual in German 03753634 M.CN8070 USER (ITA) User manual in Italian 03753635 M.CN8070 USER (BRA) User manual in Portuguese-Brazilian The manuals of the CNC may be downloaded from our FAGOR corporate website. http://www.fagorautomation.com - 9/10 -...
- Page 10 Fagor Automation shall not be held responsible for any printing or transcribing errors in the Ordering Handbook and reserves the right to make any changes to the characteristics of its products without prior notice. You must always compare the data with that appearing in the manual.
Need help?
Do you have a question about the CNC 8070 and is the answer not in the manual?
Questions and answers