Motorola MOSCAD 68P02958C00-B User Manual page 402

## 2527 LEVEL = 107
iDEN modem server description
-----------------------------
Normalized battery level
Color code
Carrier
Carrier RSSI (dbm)
Carrier SQE (db)
Battery level
Signal strength
Obtained via RALP from modem.
1. Battery level 0 to 60.
2. Color code.
3. Carrier code.
4. RSSI, received signal strength, should be more than –100 dbm.
5. SQE, received signal strength in db.
6. Battery level from 1 to 6 (highest).
7. Signal strength from 1 to 6 (highest).
## 2530 LEVEL = 110,111
IPModem statistics:
--------------------
Number of times CD has dropped
Number of times RTU powered up
Number of times Registration failed
Number of times configuration timeout occured
Number of times modem configuration has succeeded
Number of times modem configuration has failed
Number of times detetected that modem is not packet data : %% 7
Number of times link failed because of registration
Number of times re-registered modem
Number of times restarted modem
Last reason for link failure
Number of times received icmpnetunreachable
Number of times lost connection with modem (PPP)
Number of times disconnect because there was no resonse
Number of times failed dialup
Number of times failed hangup
Number of times failed start slip/ppp
1. Number of times CD became inactive, e.g. the modem was disconnected or went offline (command
mode).
2. Number of times the RTU powered up (cold or warm restart).
3. Number of times the modem was online and got deregistered from the infrastructure.
4. Number of times the configuration timeout elapsed. This may happen when configuration takes
longer than the time specified by the user in the Modem configuration timeout parameter in the Site
: %% 1
: %% 2
: %% 3
: %% 4
: %% 5
: %% of %% 6
: %% of %% 7
C-110
Software Diagnostics Output
: %% 1
: %% 2
: %% 3
: %% 4
: %% 5
: %% 6
: %% 8
: %% 9
: %%10
: %%11
: %%12
: %%13
: %%14
: %%15
: %%16
: %%17