File Menu; New; Open - Motorola MOSCAD 68P02958C00-B User Manual

File Menu

The commands in the File menu are mainly designed to handle Modem ID table files.

New

The New command clears the current Modem ID data from the screen, and opens a new
Modem ID file.

Open

The Open command opens an existing Modem ID file. When the Open command is executed,
the Toolbox displays the Open dialog box, as shown below.
The Open dialog box defaults to the config sub-directory of the Toolbox directory (e.g.,
c:\itbox550\config).
Select the Modem ID table file (see parameters below) and click OK to load it.
Dialog box parameters
Use the parameters in the order specified below. Normally you'll only use the File Name
parameter.
Look In
If the currently displayed directory is not the correct one, double-click the drive letter at the
beginning of the Directories list and locate the directory. To access sub-directories, double-
click parent directories.
File Name
Type the name of the Modem ID file. Toolbox automatically adds the .rnc extension.
Alternatively, locate the file name in the file list, and double-click the name.
5-148
DataTac Modem ID Table