Motorola MOSCAD 68P02958C00-B User Manual page 325

18. The number of empty frames ready to be received.
19. The number of frames received.
20. The number of frames transmitted.
21. The number of empty frames directed to transmission.
## 286
UART hardware control and status :-
Internal software data (key)
Internal hardware registers
Internal hardware parameters
Scc configuration register
Scc mode register
Scc data sync. register
Scc event register
Reserved register
Scc mask register
Reserved register
Scc status register
Idle characters maximum
Idle characters counter
Break characters register
Parity error counter
Framing error counter
Noise error counter
Break error counter
User defined UART addresses
Control character register
Control character table
1. Device key address.
2. H-W registers address.
3. H-W parameters address.
4. Determines the clock direction (Rx or Tx) and the baud rate
5. Determines the work mode — HDLC or UART.
6. Determines the HDLC flags.
7. The events that generate the interrupt.
8. Reserved.
9. Mask to block the interrupt.
10. Reserved.
11. The CM (Channel Monitor) and TD (Tone Detect) statuses.
12. How many idles to wait before declaring that the transmission has ended.
(DATA) : %% 1
(IREG) : %% 2
(IRAM) : %% 3
(SCON) : %% 4
(SCM) : %% 5
(DSR) : %% 6
(SCCE) : %% 7
(RES2) : %% 8
(SCCM) : %% 9
(RES3) : %% 10
(SCCS) : %% 11
(MAX_IDL) : %% 12
(IDLC) : %% 13
(BRKCR) : %% 14
(PAREC) : %% 15
(FRMEC) : %% 16
(NOSEC) : %% 17
(BRKEC) : %% 18
(UADDRX) : %%
(RCCR) : %% 20
(CHARACTERX) : %%
: %%
C-33
Software Diagnostics Output
%% 19
%% %% %% 21
%% %% %%