PLC-WXU300 Expand Serial Command Functional Specifications
8.10.10 CF_CEIL Command
Command
"CF_CEIL_%1"[CR]
"ON" ------------------------ Set Ceiling to ON
%1
"OFF" ----------------------- Set Ceiling to OFF
Set/Cancel Ceiling setting.
The value set by this command is stored in EEPROM and its setting is effective
Details
even after ALL is OFF
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.10.11 CF_REAR Command
Command
"CF_REAR_%1"[CR]
"ON" --------------------------- Set Rear to ON
%1
"OFF" ------------------------- Set Rear to OFF
Set/Cancel Rear setting.
When Rear is ON, image is left/right reversed.
Details
The status set by this command is stored in EEPROM and its setting is effective
after ALL is OFF
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.10.12 CF_ HDMI SETUP Command
Command
"CF_ HDMI SETUP _%1"[CR]
"NORMAL" -------------------------- Select Normal mode
%1
"ENHANCED" ---------------------- Select Enhanced mode
Select image mode of HDMI setup.
The status set by this command is stored in EEPROM and its setting is effective
Details
after ALL is OFF
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.10.13 CF_HDMI SOUND Command
Command
"CF_HDMI SOUND_%1"[CR]
"HDMI" ----------------------- Select PCM sound (Digital sound)
%1
"EXTERNAL" ------------- Select External sound input
Select sound mode of HDMI setup.
The status set by this command is stored in EEPROM and its setting is effective
Details
after ALL is OFF
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
37/72