Input Control Command; Cf_Input Command; Cf_Source Command - Sanyo PLC-WXU300 - 2500 Lumens Manual

PLC-WXU300 Expand Serial Command Functional Specifications

8.6 Input Control Command

8.6.1

CF_INPUT Command

Command "CF_INPUT_%1"[CR]
"CONPUTER1" ----- Select Computer1 Input
"COMPUTER2" ----- Select Computer2 Input
"HDMI" ----------------- Select HDMI Input
"VIDEO" --------------- Select Video Input
"S-VIDEO" ------------ Select S-video
"UP" ----------------------- Switch Input setting forward
When Computer 2 is selected in Terminal menu:
%1
When Monitor out is selected in Terminal menu:
"DN" ------------------- Switch Input setting backward
Select Input
The same operation as "INPUT" button of the projector and Remote Control.
This command is available in normal Power ON status.
Details
Projector returns "101" by selecting Computer 2 while Monitor out is selected in
Terminal menu.
Acceptable
Response
Unacceptable
8.6.2

CF_SOURCE Command

Command "CF_SOURCE_%1"[CR]
Input is
Computer 1
Input is
Computer 2
%1
Input is HDMI
Input is Video
Input is
S-video
Details Select Source of currently selected Input
Computer1 → Computer2 → HDMI → Video →S-video→ ...
Computer1 →HDMI → Video →S-video→ ...
When Computer 2 is selected in Terminal menu:
S-video → Video → HDMI → Computer2 →Computer1→....
When Monitor out is selected in Terminal menu:
S-video → Video → HDMI →Computer1→....
"000"[CR]
"Error code"[CR]
"ANALOG" --------- Select Analog Input
"YPBPR" ----------- Select Component Input
"SCART" ----------- Select Scart Input
"UP" ---------------- Switch Input as follows
"DN" ---------------- Switch Input as follows
""ANALOG" --------- Select Analog Input
"UP"
"DN"
Although no operation is made, projector accepts parameter "UP"
/"DN"
"HDMI" ----------- Select HDMI Input
"UP"
"DN"
Although no operation is made, projector accepts parameter "UP"
/"DN"
"VIDEO" ------------- Select Composite Video Input
"UP"
"DN"
Although no operation is made, projector accepts parameter "UP"
/"DN"
S-VIDEO ------------- Select S-video Input
"UP"
"DN"
Although no operation is made, projector accepts parameter "UP"
/"DN"
24/72
Analog →YPBPR →Scart →...
Scart →YPBPR →Analog →...