PLC-WXU300 Expand Serial Command Functional Specifications
When Input specified by %1 is inappropriate for selected Input, the projector
returns "101" and the command is not executed.
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.6.3
CF_INPUT1 Command
Command
"CF_INPUT1_%1_"[CR]
"ANALOG" ---------- Select Analog RGB Input
%1
"YPBPR" ------------- Select Component
"SCART" ------------- Select SCART
Select Input - Computer 1 and source specified in %1 at once.
Details
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.6.4
CF_INPUT2 Command
Command
"CF_INPUT2_%1_"[CR]
%1
"ANALOG" ---------- Select Analog RGB Input
Select Input - Computer 2 and source specified in %1 at once.
This command is available in normal Power ON status.
Details
Projector returns "101" by selecting Computer 2 while Monitor out is selected in
Terminal menu.
Acceptable
Response
Unacceptable
8.6.5
CF_INPUT3 Command
Command
"CF_INPUT3_%1_"[CR]
%1
"HDMI" ------------------ Select HDMI
Select HDMI Input and source specified in %1 at once.
Details
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.6.6
CF_INPUT4 Command
Command
"CF_INPUT4 _%1"[CR]
%1
"VIDEO" ----------------- Select Composite video Input
Select Video input and source specified in %1 at once..
Details
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
25/72