Yamaha MCX 1000 - MusicCAST - Digital Audio Server Manual page 155

Configuring the MusicCAST network
5 Use / / / to move the cursor to the
appropriate field, then use
parameter to the appropriate setting.
When you have set one field, use
cursor to the next field you want to set.
6 When you have finished setting codes, use
/ / to move the cursor to "OK" and press
SELECT to confirm the settings you have made
and exit the screen.
To exit the screen without making any changes move the cursor
to "Cancel" and press SELECT.
You should now set the following parameters on the
MusicCAST client
1 Server ID (for both wired and wireless connections).
2 ESSID (for wireless connections)
3 Wep key (for wireless connections) refer to the section on
configuring network settings in the MCX-A10 owner's
manual for explanations on how to set these parameters.
HINT
HINT
You can swap the assignment of IDs registered to MusicCAST
clients, regardless of whether you configure them manually or
use the Auto Configuration function to connect them to the
MusicCAST server.
Press SUB MENU while the Manual Configuration screen is
open. Use / / / to move the cursor to a movement
option and press SELECT.
/ to set the
/ / / to move the
/
114