Fujitsu MAX3073NC - SCSI,80, Dell DC961,Hard Drive Scsi Logical Interface Specifications page 184

Command Specifications
The IDD is not supported a "PBdata" bit. Therefore, if "PBdata" bit is one, this command is terminated
with CHECK CONDITION status (ILLEGAL REQUEST [=5] / Invalid field in CDB [=24-00]).
A "Relative Address (RelAdr)" bit of zero indicates that the "Logical Block Address" field specifies the
first logical block of the range of logical blocks for this command.
A "RelAdr" bit of one indicates that the "Logical Block Address" field is a two's complement
displacement. But the IDD is not supported this bit. Therefore, if this bit is one, this command is
terminated with CHECK CONDITION status (ILLEGAL REQUEST [=5] / Invalid field in CDB [=24-
00]).
The "Number of Blocks" field specifies the number of contiguous logical blocks to be written. A
"Number of Blocks" field of zero requests that all the remaining logical blocks on the medium be
written.
3-122 C141-C010