Fujitsu MAX3073NC - SCSI,80, Dell DC961,Hard Drive Scsi Logical Interface Specifications page 152

Command Specifications
Table 3.5
CDB Byte 1
FmtData CmpLst Defect list
format
1 1 d d d
(Note 1,
Note 2)
1 0 1 0 0
1 0 1
(Note 3)
1 0 1 0 0
1 0 1
(Note 1, Note 3)
1 1 1 0 0
1 0 1
1 1 1 0 0
1 0 1
3-90
FORMAT UNIT command defect processing (2 of 3)
Header
Defect
FOV DPRY
List
Length
1 1 Zero
0 0 >0
1 0
1 1 >0
0 0 >0
1 0
1 1 >0
Defect Processing Method
Neither the P List or the G List is
used in defect processing
(alternate block allocation
processing is not performed.)
The P List is saved, but the
previously existing G List is
erased.
Alternate block allocation is
performed for defects registered in
the P List, in the previously existing
G List and the defects described in
the D List transferred from the
INIT.
The D List is added to the
previously existing G List.
Alternate block allocation is
performed for defects registered in
the previously existing G List and
the defects described in the D List
transferred from the INIT.
The P List is saved, but it is not
used in defect processing.
The D List is added to the
previously existing G List
Alternate block allocation is
performed for defects described in
the D List transferred from the
INIT.
The previously existing G List is
erased and it is not used in defect
processing.
The D List is registered as the new
G list.
Alternate block allocation is
performed for defects registered in
the P List and the defects described
in the D List transferred from the
INIT.
The P List is saved, but it is not
used in defect processing.
The previously existing G List is
erased and it is not used in defect
processing.
The D List is added to the
previously existing G List.
C141-C010