EPSON EPL-N1600/Duplex Unit
2.1 OVERVIEW
This section describes the operating principles of the Duplex Unit.
2.1.1 Paper Transportation
Paper is transported through the printer Base Engine and the Duplex
Unit along the paper path shown in the Figure below when the Duplex
Mode is selected or the optional Face UP Catch Tray is installed and
selected. In the Duplex Mode, a sheet of paper printed on one side is
guided into the Duplex Unit to re-feed, turned over in the Duplex Unit,
reversed, and fed again into the Base Engine. When the optional Offset
Catch Tray is selected, a sheet printed on one side in the Simplex Mode
or a sheet printed on both sides is delivered into the Face Up Catch
Tray through the Duplex Unit.
Rev. 0
Chapter 2
Figure 2-1. Paper Transport Path
Operating Principles
11