Configure The Https Settings - Panasonic WV-SC384 Operating Instructions Manual

Configure the HTTPS settings

Click the [Network] tab on the "Network" page. (☞ Pages 26 and 27: How to display/operate the setup menu)
The settings relating to the HTTPS protocol that can enhance the network security by encrypting the access to
cameras on this page.
The HTTPS settings will be configured in the following procedure.
When using the self-signed certificate
Generation of the self-signed certificate
Note:
• To use the server certificate, you need to apply for the approval and the issue of server certificate by CA.
• Either of the self-signed certificate or the server certificate is available. If both of them are installed, the server
certificate will be used prior to the self-signed certificate.
Generation of the CRT key (SSL encryption key)
Configuration of the connection protocol
Access to the cameras using the HTTPS protocol
Generation of the CRT key (SSL encryption key) (☞ page 100)
Generation of the self-signed certificate (☞ page 101)
Generation of CSR (Certificate Signing Request) (☞ page 103)
Installation of the server certificate (☞ page 104)
Configuration of the connection protocol (☞ page 105)
99
When using the server certificate
Generation of CSR (Certificate Signing Request)
Application for the approval by CA
(Certificate Authority) - Issue of the server certificate
Installation of the server certificate