Set Mask Areas - Panasonic WV-SC384 Operating Instructions Manual

Set mask areas

When "Off" is selected for "Wide dynamic range (WDR)"
"Back light compensation(BLC)", it is possible to compensate for backlight by masking brighter areas.
Step 1
Display the "Image adjust" setup menu. (☞ Page 58)
SW395
SC384
SC385
66 66
, or "Super Dynamic(SD)"
SC384
Step 2
Click the [Start] button of "Mask area".
→ Borders will appear and the image displayed on the
[Image/Position] tab will be divided into 48 (6x8).
Step 3
Click the divided areas to be masked.
→ The clicked areas will be masked and will become
white. To cancel masking, click the area again.
Step 4
Click the [End] button after completing masking areas.
→ The borders on the image displayed on the [Image/
Position] tab will disappear.
and
SW395 SC385