Panasonic WV-SC384 Operating Instructions Manual page 131

Symptom
Cannot access from the web
browser.
Cause/solution
• Is the same IP address provided to other devices?
Are there contradictions between the address and the
network subnet to be accessed?
<When the camera and the PC are connected in the same
subnet>
Are the IP addresses of the camera and the PC set in
a common subnet? Or is "Use Proxy Server" for the
settings of the web browser checked?
When accessing the camera in the same subnet, it is
recommended to enter the address of the camera in
the "Don't Use Proxy For These Addresses" box.
<When the camera and the PC are connected in the dif-
ferent subnet>
Is the IP address of the default gateway set for the
camera correct?
• Is the name currently used to access the camera different
from the name registered for the "Viewnetcam" service?
Access the camera again with the registered name.
• Did you access "http://" while using the HTTPS function?
To use the HTTPS function, access "https://". It is also
necessary to enter the port number.
131
Reference
pages
–
113
106