Installing The Usb Keyboard/Mouse Receiver - HP Z1 User Manual

Installing the USB keyboard/mouse receiver

If you order a wireless keyboard and mouse as an after-market option, follow these steps to install the
keyboard/mouse receiver.
1.
Turn off the workstation, then unplug the power cord from the power outlet.
2. Holding the workstation firmly at the center of the top and bottom, maneuver the workstation into a
horizontal position.
Figure 3-10
3.
Slide the latches on the bottom of the workstation outward and open the chassis.
Figure 3-11
16 Chapter 3 Setting up and using the workstation
Maneuver workstation to horizontal position
Open chassis