Canon MX870 Series User Manual page 747

The currently set product name is displayed. To change the scanner, click Change... and select
the product you want to use.
Profile
Select Photo (Default) or Documents according to the document to be scanned. To save a new
Profile, select Add profile.... You can specify the details in the Add New Profile dialog box.
Source
Select a scanner type. To scan from the Platen, select Flatbed. To scan from the ADF (Auto
Document Feeder), select Feeder (Scan one side) or Feeder (Scan both sides).
Paper size
Select the paper size. Paper size can be specified only when Source is Feeder (Scan one side)
or Feeder (Scan both sides). When scanning both size of the documents automatically, the
supported document sizes are A4 or Letter.
Color format
Select how to scan the document.
File type
Select a file format from JPEG, BMP, PNG and TIFF.
Resolution (DPI)
Enter the resolution. Specify a value between 50 dpi and 600 dpi. 300 dpi is set by default.
Resolution
Brightness
Move the slider to adjust the brightness. Move it to the left to darken and right to brighten the
image. You can also enter a value (-100 to 100).
Contrast
Move the slider to adjust the contrast. Moving it to the left will decrease the contrast of the image,
thus softening the image. Moving it to the right will increase the contrast of the image, thus
sharpening the image. You can also enter a value (-100 to 100).
Preview or scan images as separate files
Select this checkbox to preview or scan multiple images as separate files.
See how to scan a picture
Click to open Windows Help and Support.
Note
With network connection, you cannot specify Brightness and Contrast.
In Windows 7, See how to scan a picture is not displayed.
Click Preview to preview the image.
4.
The preview image appears on the right.
Important
With network connection, scan without preview when scanning documents from the ADF (Auto
Document Feeder). If you preview, place the document again and scan.
If there is document left in the ADF (Auto Document Feeder) after previewing, press the OK
button on the Operation Panel of the machine and remove the document.
Click Scan.
5.
When scanning is completed, the scanned image appears in the application.
Scanning with WIA Driver 1.0
The following is an example of scanning using Paint.
Place the documents on the Platen or ADF (Auto Document Feeder).
1.
Placing Documents