Canon MX870 Series User Manual page 468

> >
Advanced Guide
Scanning Scanning with Using the Operation Panel of the Machine
USB Flash Drive/Memory Card Using the Operation Panel of the Machine
Saving Scanned Data on the USB Flash Drive/Memory Card
Using the Operation Panel of the Machine
You can save scanned data on the USB flash drive or memory card using the Operation Panel.
Important
Do not remove the USB flash drive or memory card from the machine under the following
conditions:
While scanning is in progress
Before saving the scanned data
You cannot use the USB flash drive and memory card at the same time. Be sure to use either of
them as a media for saving scanned data.
For safety reasons, we recommend backing up the scanned data saved on a USB flash drive or
memory card to another media periodically to avoid unexpected accidents.
We assume no responsibility for damage to or loss of data for whatever reason even within the
warranty period.
Make sure that the machine is turned on.
1.
Press the SCAN button.
2.
The screen for selecting to which you save the data is displayed.
Note
If the setting screen for forwarding the data to the USB-connected computer is displayed on the
LCD after you press the
selecting to which you save the data.
Insert the USB flash drive into the Direct Print Port or the memory card into the Card
3.
Slot.
See Inserting the USB Flash Drive
For how to insert the memory card into the Card Slot or information on the types of the memory card
compatible with the machine, refer to
Select USB flash drive or
4.
Select Save to USB flash drive or
5.
the button.
OK
button, press the left Function button to display the screen for
SCAN
for how to insert the USB flash drive into the Direct Print Port.
Printing from a Memory Card
Memory card, then press the
> Saving Scanned Data on the
.
OK
Save to memory card, then press
button.