Canon MX870 Series User Manual page 437

> Printing Using the Operation Panel of the Machine
Advanced Guide
Card Slot as the Memory Card Drive of the Computer
Setting Up the Card Slot as the Memory Card Drive of the
Computer
The Card Slot of the machine can also be used as the memory card drive of the computer.
Note
For details on using the Card Slot over a network, see
Important
When Read/write attribute in Device user settings in Device settings is set to Writable from USB PC
or Writable from LAN PC using the Operation Panel of the machine, you cannot print photos on a
memory card using the Operation Panel of the machine. After using the Card Slot as the memory
card drive of the computer, remove the memory card, then be sure to set Read/write attribute to Not
writable from PC. When you turned off the machine, Writable from USB PC or Writable from LAN PC
will be canceled and the setting is returned to Not writable from PC when you turn on the machine
next time.
Make sure that the memory card is not set.
1.
If the memory card is set, remove it from the Card Slot. For details, refer to
.
Card
Make sure that the machine is turned on, then press the Setup button.
2.
Device settings, then press the
Select
3.
Use the button to select Device user settings, then press the
4.
Use the button to select Read/write attribute, then press the OK button.
5.
Specify the read/write attribute.
6.
Not writable from PC
The Card Slot is used only for reading. Be sure to select this mode when printing photos from a
memory card.
Writable from USB PC
The Card Slot is used as the memory card drive of a computer connected to the machine via USB.
Data can be written on the memory card from the computer.
Writable from LAN PC
The Card Slot is used as the memory card drive of a computer connected to the machine via a
network. Data can be written on the memory card from the computer.
button.
Press the
7.
OK
Important
If you use the Card Slot as the memory card drive of the computer, you need to perform a "safe
removal" operation on your computer before physically removing the memory card from your
machine.
Right-click the
Using the Card Slot over a Network
Removable Disk icon and click Eject. If Eject is not displayed on the
> Printing from a Memory Card > Setting Up the
Printing from a Memory
button.
OK
button.
OK
.