Canon MX870 Series User Manual page 615

> >
Advanced Guide Scanning with the Bundled Application Software
Scanning
Settings Dialog Box (One-click Mode Screen)
Scan Settings Dialog Box (One-click Mode Screen)
The Scan Settings dialog box opens when you click Specify... in a dialog box of the One-click Mode
screen.
In the Scan Settings dialog box, you can make advanced scan settings.
Note
The displayed items vary by document type and how the screen was opened.
Document Type
Select the type of document to be scanned. When Auto Mode is selected, the document type is
automatically detected.
In that case, Color Mode, Document Size, etc. are automatically set as well.
Important
To scan correctly, select a document type that matches the document to be scanned.
Place documents correctly according to the type of document to be scanned. Otherwise,
documents may not be scanned correctly.
See "
Placing Documents
Automatic Duplex Scanning / Duplex scan when scanning from ADF
Select this checkbox, then scan from the ADF (Auto Document Feeder) to scan both sides of the
documents automatically.
When Document Type is Auto Mode, the checkbox changes to Duplex scan when scanning from ADF.
You can select whether to scan both sides or one side of the documents from the ADF (Auto
Document Feeder) when scanning by automatically detecting the document type. Select this checkbox
to scan both sides. Deselect it to scan one side.
Important
Automatic Duplex Scanning is available only when Document Type is Document (ADF Duplex).
Output Settings...
Specify how to output the paper when scanning both sides from the ADF (Auto Document Feeder).
" for details on how to place documents.
> MP Navigator EX Screens
> Scan